How to Solve PXE1110CDM-G003 Boot Loop Problems

How to Solve PXE1110CDM-G003 Boot Loop Problems

How to Solve PXE1110CDM-G003 Boot Loop Problems

The PXE1110CDM-G003 boot loop error can be a frustrating issue, often preventing a computer from starting up normally. Let's break down the reasons behind this problem, how it happens, and step-by-step instructions on how to resolve it.

Possible Causes of PXE1110CDM-G003 Boot Loop

Incorrect Boot Device Priority: The PXE error typically occurs when the system tries to boot from a network (PXE boot) but cannot find a valid operating system or network server to connect to.

Corrupted Operating System: If the computer's main storage device (hard drive or SSD) is corrupted, the system may be unable to boot into Windows or another OS, causing it to fall into a boot loop.

Faulty or Misconfigured BIOS/UEFI Settings: The BIOS/UEFI settings might be incorrectly configured, causing the system to attempt network boot instead of booting from the local drive.

Damaged or Missing Boot Partition: The boot partition or bootloader on your hard drive might be damaged or missing, resulting in the system trying to access the network (PXE) instead.

Hardware Failures: In some cases, hardware issues, like a faulty hard drive or SSD, can also lead to boot failures and a loop.

Step-by-Step Guide to Fix PXE1110CDM-G003 Boot Loop

Step 1: Check Boot Device Priority in BIOS/UEFI

The system might be trying to boot from the network due to incorrect boot priority settings. Here’s how to change the boot order:

Restart the Computer: Press the key that allows you to access the BIOS/UEFI settings. Common keys are F2, F10, F12, or Del. Enter BIOS/UEFI: Once in the BIOS/UEFI menu, look for the "Boot" or "Boot Order" section. Change Boot Order: Ensure that your hard drive (or SSD) is set as the first boot device, not the network boot (PXE). Save and Exit: After making changes, save the settings and exit BIOS/UEFI (usually by pressing F10 or selecting "Save and Exit"). Step 2: Check the Hard Drive or SSD Health

If the hard drive is faulty, it could be preventing the system from booting properly. Here's how to check:

Disconnect External Devices: Remove any external devices like USB drives or external hard drives that might be affecting the boot process. Run a Disk Check: You can run a disk check from a bootable USB drive with Windows installation media: Boot from the USB drive. Choose "Repair your computer" and then select "Troubleshoot" > "Advanced Options" > "Command Prompt". In the Command Prompt, type chkdsk /f C: (replace "C:" with the appropriate drive letter if necessary) to check the hard drive for errors. Step 3: Repair the Bootloader

If the bootloader or boot partition is damaged, you can attempt to repair it using a Windows installation media:

Boot from Windows Installation Media: Insert a bootable USB drive or DVD with Windows installation files and boot from it. Select Repair Your Computer: Once in the Windows setup menu, select "Repair your computer" rather than installing Windows. Go to Command Prompt: Navigate to Troubleshoot > Advanced Options > Command Prompt. Run Boot Repair Command: In the Command Prompt, run the following command to repair the boot files: bootrec /fixmbr bootrec /fixboot bootrec /rebuildbcd Restart the Computer: After the repair process completes, restart your system and check if the issue is resolved. Step 4: Reset BIOS/UEFI Settings to Default

If your BIOS/UEFI settings are misconfigured, resetting them to default could fix the issue:

Enter BIOS/UEFI Settings: Restart the computer and press the key to access BIOS/UEFI (F2, F10, Del, etc.). Reset to Default: Look for an option like "Load Default Settings" or "Restore Defaults" and select it. Save and Exit: Save the settings and restart the system to see if the issue is resolved. Step 5: Reinstall the Operating System

If none of the above steps work, the operating system might be too damaged to repair. You may need to reinstall Windows:

Backup Important Data: If possible, backup any important data from the drive using a bootable USB or by connecting the hard drive to another computer. Install Windows: Boot from Windows installation media and follow the on-screen instructions to reinstall the operating system. Select the Correct Partition: During installation, ensure you select the correct partition (typically the primary one) to install Windows.

Conclusion

The PXE1110CDM-G003 boot loop problem can be caused by several factors, including incorrect boot settings, a damaged operating system, or a corrupted boot partition. By following the steps above, you should be able to identify and fix the issue, whether it's adjusting BIOS settings, repairing the bootloader, or reinstalling the operating system.

If the problem persists even after these steps, it could indicate a deeper hardware issue, such as a faulty hard drive or motherboard, in which case you may need to consult a professional technician for further assistance.